Industry News

The flexible and correct operation method of the self-loading concrete mixer truck can be summarized as: one light, two stable, three separate, four diligence, five coordination, six prohibition.

When purchasing a concrete mixer truck, some customers feel that the larger the volume of the mixer, the better. Although theoretically, this concept is correct, but in practice, if you choose to use and mix like this, the larger the volume must be the tank. Bigger.
How to choose the volume of the self loading concrete mixer truck out of the misunderstanding?

mobile Self-loading concrete mixer is a kind of equipment that can mix materials at high speed. It has a wide range of applications in many industries, but everyone is not clear. The easy-to-use self-feeding mixer is ideal because in addition to our needs, the easy-to-use automatic feeding mixer also requires skilled operators of the conical mixer. Below we will tell you how to use the mobile self-feeding mixer truck.

First: the concrete placing boom rotation fails and there is noise

The cause of this failure: non-lubricated bearing damage



Solution: Grease replacement

Second: telescopic outrigger telescopic issuance

The concrete delivery pump sometimes has some small faults in use, which affects safety. Through a lot of practice, Qingke Heavy Industry has discovered that in the construction process of concrete pumps and wet spraying machines, due to the influence and influence of various factors, there are a series of uncertain safety hazards. These safety hazards have an impact on the construction progress and personnel safety. And engineering cost control is a great test.

The traditional spraying support technology of underground space mainly relies on manual operation of spraying machine construction, spraying a certain thickness of concrete to achieve the supporting effect. In the traditional spraying environment, there are a large number of dust particles, noise pollution is also quite serious, and there is a danger of underground collapse, which poses a serious threat to the life and safety of operators in underground space construction.

In the working process of the fine stone concrete pump, if the use is not standardized, it is easy to cause premature damage to some parts of the equipment, which not only increases the maintenance cost of the equipment, but also seriously affects the construction progress. Then, how to improve the service life of the vulnerable parts of the fine stone pump has become a problem that we need to pay attention to.

The double nozzle wet spraying machine is a new type of pumping wet concrete spraying machine, which adopts hydraulic pumping type, which has high construction efficiency, high system reliability and stable delivery volume, ensuring fast, uniform and stable spraying concrete operation.

The double-jet hydraulic wet-jetting machine is a pumping concrete wet-jetting machine. It adopts double-nozzle spraying operation. The production capacity is 12-16 cubic meters per hour. It has the characteristics of high pumping pressure, long conveying distance, low resilience, and high construction efficiency. . Double spray hydraulic wet concrete spraying machine is widely used for wet spraying concrete machine construction operations in mines, tunnels, culverts, subways, hydropower projec

The wet shotcrete construction process is to produce finished concrete in the cement concrete mixing station according to the mix ratio. After the concrete is transported to the working surface, the concrete wet shotcrete machine is used to press it to the nozzle position, and the quick-setting agent is added to the nozzle. High-speed spraying. In the high-speed spraying process, the concrete and the accelerator are fully combined, and the concrete spray layer is formed

The trailer concrete mixing pump is a very common mechanical equipment in construction. It has a smart body, easy to drag, economical and cheap, so it is welcomed by the majority of construction parties. Compared with other concrete pumps, concrete mixer with pump need to be installed in order to carry out construction during use, and certain skills need to be paid more attention to. So what problems should be paid attention to in the use of trailer concrete mixing pump?

The fine stone concrete pump is a kind of concrete transportation equipment developed for the characteristics of floor heating construction. Because of the large-area and high-efficiency construction of the floor heating engineering filling layer or mortar filling layer, it is highly anticipated by a wide range of construction companies. So why does the fine stone concrete pump have such an effect? Now we introduce the characteristics of the major components of the fine stone concrete pump

1. Reduce the cost of use. It replaces the wear between the S valve feed port and the feed port of the cylinder with the wear between the eye plate and the cutting ring. In this way, the cost of replacing a set of eye plate and cutting ring is much lower than the cost of replacing the S valve and the material cylinder.

The fine stone concrete pump is a kind of concrete transportation equipment developed for the characteristics of floor heating construction. Because of the large-area and high-efficiency construction of the floor heating engineering filling layer or mortar filling layer, it is highly anticipated by a wide range of construction companies. So why does the fine stone concrete pump have such an effect? Now we introduce the characteristics of the major components of the fine stone concrete pump

What are the precautions in the operation of the wet spray machine? The correct use of wet spraying machines, wet spraying trolleys and other equipment will help ensure the normal progress of construction and ensure the safety of construction personnel. For example, use mortar to lubricate the concrete wet spraying machine and the feeding pipe before spraying, and rinse the remaining concrete in the pipe with water after spraying, which can effectively extend the service life.

1. The pumped concrete should meet the pumpability requirements, and if necessary, the mixing ratio of the pumped concrete should be determined through test pumping.
The ratio of the large particle size of the coarse aggregate to the diameter of the concrete pump conveying pipe should be: when the pumping height is below 50m, it should not be greater than 1:3 for gravel, and should not be greater than 1:2.5 for pebbles; when the pumping height is 50-100m, It should be in the range of 1:3 to 1:4

The phenomenon of engine oil blackening is a cliché, but the blackening of hydraulic oil seems to have not been specifically mentioned. Today, the editor of the trailer concrete mixing pump will explain to you several reasons for the blackening of the hydraulic oil of trailer concrete mixer with pump mixing trailer pump:

In recent years, tunnel construction safety accidents have occurred frequently. In order to prevent hidden safety hazards, * is gradually improving tunnel construction requirements and widely adopting new construction machinery and equipment. Today, the editor of Saintyol DAWIN Machinery explains the importance of using truck mounted robot wet concrete spraying machine.

The fine stone concrete pump is a special type of concrete pump. This concrete pump is widely used in floor heating projects and floor construction, so it is welcomed by the majority of construction parties. So on the construction site, what are the pumping requirements of the fine stone concrete pump? Now let’s take a closer look.

The cutting ring of the concrete pump is originally a vulnerable part, which is used to make it repeatedly wear and tear during the working process. Under normal circumstances, the wear rate of the cutting ring can only be reduced by improving the pumpability of the concrete. The cutting ring can be reduced by checking and tightening the nuts to ensure that the gap between the cutting ring and the glasses plate is about 2 to 4 mm. Accidental damage.

More and more customers will encounter a lot of problems in the process of using the wet spray machine. Have some questions about the maintenance of the wet spray machine? Below, Saintyol DAWIN Machinery will answer your questions one by one!

Check the pressure of the main pump system of the concrete delivery pump (during pumping operation). If it does not reach the specified value, check the overflow valve and the main oil pump. For closed systems, under normal circumstances, the concrete pump motor starts and the charge pump works, and the pressure display should be around 2.5MPa. If the pressure is insufficient, adjust the charge pump safety valve and check the wear of the charge pump.

Concrete pumps and wet spraying machines are widely used products in construction. They have the advantages of uniform mixing of slurry, good stability, and easy adjustment of the ratio of mortar, stone and cement. The correct use of concrete pumps and wet spraying machines is the key to prolonging equipment life and improving production efficiency. So, how can we maintain the details to improve the service life of the fine stone concrete pump? Based on years of experience,

The concrete pump is mainly used for the secondary pouring of the construction project under construction. The concrete pump is mainly used to transport the mortar by hydraulic means. The reciprocating operation of the double cylinder is filtered through the vibrating screen to complete the transportation of various mortar and fine stone concrete. . Saintyol DAWIN Concrete Pump has the advantages of large capacity, high pressure, labor-saving, material-saving, and convenient movement.

What are the pumping principles of wet spray truck? How does the concrete pump pump concrete? Based on long-term repeated tests and customer surveys, Saintyol DAWIN believes that there are many factors that affect the suction performance of the mixing trailer pump pumping system, which are independent and affect each other, including the angle between the conveying cylinder and the horizontal plane, and the reversing frequency of the main hydraulic cylinder.

The pump pipes have pressure parameters, and different pump pipes are selected according to the delivery pressure of the pump truck.

The fine stone concrete pump is a kind of concrete transportation equipment developed for the characteristics of underfloor heating construction. Because of the large area and high efficiency construction on the underfloor heating engineering filling layer or mortar filling layer, it is highly anticipated by a wide range of construction companies. So why can the fine stone concrete pump have such an effect? ​​

Generally speaking, the normal service life of the mixing pump is about seven or eight years. But if there is no good maintenance, the service life may have to be compromised. If there is correct operation and reasonable maintenance, there is no problem with the mixing pump for more than ten years. How to maintain the mixing pump to last longer?