32m 4M Sections Column Tower Hydraulic Jack-Up Concrete Placing Boom, Self Climbing Concrete Placing Boom
32m 4M Sections Column Tower Hydraulic Jack-Up Concrete Placing Boom, Self Climbing Concrete Placing Boom
Model | Units | HGY32F | |||
Performance | Max.radius of placing boom | m | 32 | ||
Freestanding height (to the joint between the end of the boom and swivel table) | m | 22.7 | |||
Boom articulation | ° | 400 | |||
Slewing brake | / | always close | |||
Working temperature | ℃ | 0℃~60℃ | |||
Total weight | kg | 24900 | |||
Counter weight | kg | 2900 | |||
Power | / | 380V/50HZ | |||
Motor | Model | / | Y2-160L-4 | ||
Power | kW | 15 | |||
Hydraulic system | Pressure | MPa | 30 | ||
Flux | l/min | 18 | |||
Hydraulic oil | Circumstance temperature 35℃-50℃ | / | L-HM 68 | ||
Circumstance temperature 5℃-35℃ | / | L-HM 46 | |||
Circumstance temperature -15℃-5℃ | / | L-HM 32 | |||
Control mode | / | Short-haul Control /radio remote control | |||
Pipeline cleaning | / | Wet cleaning/Dry cleaning | |||
Structure of tower body | / | Tubular column | |||
Section of tower body | m×m | 0.75×0.75 | |||
Boom | Shape | / | Four hydraulic foldable arms | ||
Inner diameter of pipeline | mm | DN125 | |||
End hose | ″×mm | 5″×3000 | |||
1st section | Length | m | 9 | ||
Articulation | ° | 0°~82.5° | |||
2nd section | Length | m | 7.65 | ||
Articulation | ° | 0°~180° | |||
3rd section | Length | m | 7.65 | ||
Articulation | ° | 0°~180° | |||
4rd section | Length | m | 7.7 | ||
Articulation | ° | 0°~180° | |||
Climbing | Climbing mode | / | By hydraulic cylinder climbing | ||
Interval of climbing | m | 0.52 | |||
Floor frame | / | Hole prepared in floor | |||
Shaft frame | m | Hole prepared in floor2.0~2.7 | |||
Min.Interval of climbing frame | Climbing | m | 3.0 | ||
Placing concrete | m | 6.0 | |||
Rest | m | 6.0 |
The slewing support is a large-sized bearing which connects the boom and the column, and bears the overturning moment produced by the boom. It is a key component that directly affects the whole machine’s safety. The motor redactor is from Comer in Italy. It is in a high speed rate, and long life span and reliable. The hydraulic motor can rotate the slewing table and the boom 365°through the redactor.
- Tel
- *Title
- *Content
Don't forget to sign up!
Find out early about all upcoming promotions and
newproducts releases
- Name:
- Michael Liu
- Tel:
0086-186-69798625
0086-532-89659612
- WhatsApp:
- https://wa.me/8618669798625
- Address:
- Office: 216# THE 308 STATE ROAD, CHENGYANG DISTRICT, QINGDAO SHANDONG,CHINA. Factory: No.413# Tieqishan Road, Yuhuangling Industrial Park, Chengyang District, Qingdao, China